Hi everyone,

had a labour intensive weekend
Did rust repairs and i stalled a Westfalia tow hitch!

Short question, as I bought one from the scrap yard - is there a need for a circuit braker?

thank you 🙋🏼‍♂️

No, the wiring should just plug into a module in the right hand boot cubby, the module for the trailer on a 2004 is a box about the size of a packet of cigarettes. If you have a genuine harness then this should just be plug and play, plus a bit of telling the CCf there is a to leave fitted. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Thank you - that’s what I did - it fitted right next to the circuit break in the boot!
However Rave says that there are a few breakers that need to be added!

CCF programming necessary on a ‘04? Thought it was only necessary from 2010 onwards!

Cheers

It’s a grey area.... if it works I wouldn’t worry.... There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Haven’t tried it yet! Just wanted to make sure to take fuses with me when I will pick up the trailer!
IID Tool I have with me anyway - so I’ll double check if it recognises the trailer ECU!

Any other instructions when installing the original 7-pin kit?

Cheers