fullfatrr.com - View topic - [For Sale] Range Rover 4.2 Supercharger Snout & Supercha

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > For Sale & Wanted > [For Sale] Range Rover 4.2 Supercharger Snout & Supercha

Page 1 of 1

Print this entire topic ·

dhallworth

Member Since: 10 Oct 2011
Location: Glasgow
Posts: 2973

2012 Range Rover Autobiography TDV8 Baltic Blue

[For Sale] Range Rover 4.2 Supercharger Snout & Supercha

Last year I bought a spare Supercharger for my L322 to rebuild it. I stripped it and rebuilt the snout and when I was about to replace the case bearings I noticed 2 hair line cracks in the case. As a result I’ve got a spare refurbished snout from an Eaton M112 as fitted to the 4.2.

The snout has had 2 new bearings and a new oil seal fitted to it. Parts were supplied by Powerhouse Automotive.

To fit this all you will need is some Loctite 518 to create a seal between the rotor pack and the snout.

If you’ve not got access to a press or are short of time this will allow you to remove one and refit the other straight away.

Additionally to the snout, I have a complete Supercharger available.

This Supercharger has been stripped back to a bare casing, vapour blasted and rebuilt.

The needle roller bearings at the back of the casing have been replaced, both bearings in the snout have been replaced as has the oil seal. The coupler is also a brand new genuine Eaton part. As well as all of the new parts being fitted the snout has also been fitted with a 6% performance pulley.

The pulley was bought from Powerhouse and was also fitted by them. The only thing that hasn’t been replaced in this Supercharger is the rotor pack bearings, however, there is zero float in them and they appear to be in perfect condition.

The reason that I’ve not bolted the complete Supercharger back together yet is because I don’t mind which snout I refit to the charger. If someone would rather have a totally original Supercharger then I am happy to refit the snout with the original pulley, if someone would rather have a Supercharger with a 6% performance pulley then I am happy to build it back up with the snout with the modified pulley.

So… prices…

Snout with original pulley - £150
Snout with 6% performance pulley - £350

Supercharger with original pulley - £450
Supercharger with 6% performance pulley - £650

I’m happy to post the Supercharger snout (around £10) or the complete Supercharger (cost not yet known).

I’m only selling these as with all the work I’ve done to my car, I’ve decided to fit a brand new Supercharger.

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

28th Apr 2022 12:09am

dhallworth

Member Since: 10 Oct 2011
Location: Glasgow
Posts: 2973

Bump 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

1st Jun 2022 4:11pm

dhallworth

Member Since: 10 Oct 2011
Location: Glasgow
Posts: 2973

Update - Only the rebuilt snout and original pulley still available.

This has been cleaned up, had both bearings replaced in the press and the oil seal replaced with a brand new one.

Comes with a sealed bottle of Supercharger oil.

Thanks,
David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

7th Jun 2022 5:32pm

strongstuff

Member Since: 26 Jun 2019
Location: North Wales
Posts: 42

2007 Range Rover Supercharged 4.2 SC V8 Stornoway Grey

That will teach me for dithering!

That full SC with the 6% pulley was an absolute bargain, I've been trying to justify buying it for the last 3 days

If you're not fast, you're last!

GLWS 2008 L322 4.2 V8 SC Stornoway Grey
2006 L322 4.2 V8 SC Java Black

7th Jun 2022 5:35pm

dhallworth

Member Since: 10 Oct 2011
Location: Glasgow
Posts: 2973

I’ve actually decided to fit that one to mine

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

7th Jun 2022 8:45pm

strongstuff

Member Since: 26 Jun 2019
Location: North Wales
Posts: 42

You won't be disappointed!

I've already got the smaller pulley on mine, and there's nothing wrong with any of it that I know of, I just fancied a "spare" charger that I would have fitted to mine then got the one on it now refurbed and put it on our other one.

Did you have any luck with Roland finding you some cams?

Aaron 2008 L322 4.2 V8 SC Stornoway Grey
2006 L322 4.2 V8 SC Java Black

8th Jun 2022 7:07am

dhallworth

Member Since: 10 Oct 2011
Location: Glasgow
Posts: 2973

Bump - Rebuilt snout with original pulley still for sale.

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

27th Jun 2022 8:59pm

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum