Is is possible, using the IID tool, to set the the mirrors to automatically fold in and out when locking and unlocking? Tym
(current) L322 3.6 TDV8 Vogue 2008 Tonga Green
(previous) L322 4.4 LPG Vogue SE 2003

If it sticks, force it. If it breaks, it needs replacing anyway.

Yes...  Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
-Click here for Thread-
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click here for Project Fatty off roader-

Can this be done on the earlier 322’s as well, Pete?

I know the 2010 onwards cars do it but wasn’t aware you could program the earlier ones to do it too.

I’d like to program the 2 stage unlocking too.

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior
2013 Range Rover Sport SDV6 HSE Black Edition in Santorini Black with Ebony Interior

I've done it, but not by programming as the support isn't there in the hardware. Essentially by using a relay across the mirror switch contacts triggered by the lock/unlock signal with an 'aux on' inhibit and a simple timer circuit to trigger a relay across the unlock switch on the centre dash triggered by 'ignition off'.
Two stage unlocking is easily programmed, as is the 'chirp on lock', can be done per key. - I don't use IID so not sure of the process with that tool.

Thanks Haylands… any clues as to where I find it?! 🤣 Tym
(current) L322 3.6 TDV8 Vogue 2008 Tonga Green
(previous) L322 4.4 LPG Vogue SE 2003

If it sticks, force it. If it breaks, it needs replacing anyway.