Is there just the one on the right side suspension turret top ? Need to send in a pic for a certificate of conformity, but the electrical box is blocking a clear pic of it. If so, is the box easily removed on a 2002 4.4 BMW V8 car ?

Mine is the same model, it has the VIN showing in the bottom left corner of the windscreen. There’s also a plate at the bottom of the right B pillar ( but that may only be on Australian-delivered vehicles). Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

Last edited by p38arover on 22nd Dec 2022 6:09am. Edited 1 time in total

Thanks for the reply, I should have mentioned that LR require clear pictures of the VIN plate, windscreen VIN and a body stamping VIN. Was wondering if the strut ower is the only body stamp VIN.
Thanks

I'll have a look at mine tomorrow morning (it's 2230 here). Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

I had a look and, on mine, the VIN behind the box is easily readable. It looks like it’s a sticker so I wonder if its position could vary slightly.

I didn’t know it was there until you mentioned it. Mine was so dusty that, initially, I couldn’t see it.

RH turret behind box:

Click image to enlarge

Click image to enlarge

Was my reply what you needed? Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

It would be nice if you replied. Ron B. VK2OTC
2003 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA