got car back from stealers today after a software update. been out fiddling with things to see all is well and something caught my eye.

when the 4x4 info screen is displayed the selected gear should be displayed. mine seems to be in neutral all the time except when reverse is selected and it changes to R.

everything works fine on the dash display, i get the full range of numbers and letters perfectly there, just the 4x4 screen that doesn't work.

could some of you maybe when you get a chance have a look at your displays and see what they do?

i am sure that this yet again worked before it was plugged in to the dealers testbook, but can't be 100% sure.

is there anyway of resetting this display??

any help or advice will be greatly received. Current: TDV8 (3.6) RRS HSE



Past: TDV8(4.4) Vogue
Discovery 3 Commercial
TDV8(3.6) Vogue
TD6 Vogue
D2 V8 ES
D1 V8 ES
RR Vogue Classic

Do you have a video-in-motion module?

yes only fitted it the recently, is this the cause of the problem? Current: TDV8 (3.6) RRS HSE



Past: TDV8(4.4) Vogue
Discovery 3 Commercial
TDV8(3.6) Vogue
TD6 Vogue
D2 V8 ES
D1 V8 ES
RR Vogue Classic

It "lies" to your screen by modifying the data sent to it so the screen thinks it's not in drive and moving.

AAAAHHHH...a cunning plan!! well that would explain things. at least i know what is wrong now.

thanks..  Current: TDV8 (3.6) RRS HSE



Past: TDV8(4.4) Vogue
Discovery 3 Commercial
TDV8(3.6) Vogue
TD6 Vogue
D2 V8 ES
D1 V8 ES
RR Vogue Classic