Hi, I am embarking on changing my ACE pipes at home myself, and have got stuck on what I thought would be the easiest connection to do first

Can anyone tell me how the front left connection that goes to a small cooler comes undone? I can feel the connection tucked above the front rail body structure in the front left wheelhouse, and from the new pipe it looks like it is some sort of snap fit, but I cannot figure out how to disconnect the old pipe?

Obviously don’t want to break anything, so any insights appreciated:)

2016 LHD 5.0

...

Last edited by Phoenix on 23rd Dec 2023 11:30pm. Edited 1 time in total

Thanks, much appreciated. It will be here from amazon tomorrow and I will get on it at the weekend

...and there was my thinking all I'd need was a 10mm socket!

I made up this to release the connection. I think that the two bits of copper pipe were for the union in question, and the black thing was for a different connection.

Chris.

Thanks guys, the tool Phoenix posted worked a treat. I can also see how your copper sleeved would work too, Chris. Nice handy work there!

Next ACE pipe I could do with some advice on how to disconnect is from the other side of the engine bay, I guess it’s the other half of the cooling line for the ACE.

Any idea what tool I need here and/or tips to disconnect? 🙂

Click image to enlarge

Click image to enlarge

That must be what that black tool I made was for... Looks familiar.

Chris. L405 - 4.4SDV8 Vogue
P38 - 4.6V8 HSE
Land Rover series IIA V8

...

Last edited by Phoenix on 23rd Dec 2023 11:31pm. Edited 1 time in total

Thanks, guys. Much appreciated advice. I will get on it and give it a go at the weekend!

Got it done. Easy once you know how 😆

Got this Lisle tool from Amazon after failing at fabricating my own. Perfect fit for the job.

Sharing in case of need from other newbies!

Click image to enlarge

Click image to enlarge

Click image to enlarge

Nice!

I always have the issue that I know what the special tool should look like, but have no idea what it's called. So I make one.

Chris. L405 - 4.4SDV8 Vogue
P38 - 4.6V8 HSE
Land Rover series IIA V8

Hi all.. I'm trying to source a replacement for my ACE pipes.. they are leaking at the driver's side front (behind the wheel arch.. further down.. I've attached some pictures below.

I think this is the pipe (or set of pipes) that I need:

Click image to enlarge

Click image to enlarge

Click image to enlarge

They rust from day one and leak in 5-10 years, IMHO a waste of time fitting second hand, most of the cost is in labour....

See this thread for details....

https://www.fullfatrr.com/forum/topic67828.html Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
-Click here for Thread-
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click here for Project Fatty off roader-

Thanks Pete. Just reading through it earlier. I see you got your pipes from Duckworths.

I think I will take your advice and just buy new. I've had some help from Fisha via PM so all being well I should be able to tackle it on a dry day, albeit it will be done with axle stands and a trolley jack!

Thanks all.