Unknown cable identification - OSR suspension area | |
Long shot but having had a look in this area on the L322 I recently bought, I see a cable looking very sorry for itself dangling around the rear suspension area, with a 2 pin plug on the end of it not connected to anything.
It comes off the same section of loom that runs to the ride height sensor, also looking very sorry, that’s the 3 pin plug and is connected. I’ve had a good look around the area that the plug will reach to but can’t obviously see anything it could plug into. I guess it could be a plug for an option that wasn’t selected. Either that or it’s something tucked up out of the way that I can’t see.
There isn’t anything obviously unplugged in terms of things not working but being totally new to these cars I thought I’d check while I’m working in that area. It has crossed my mind it could have been causing a fault when plugged in so it was just disconnected! Have checked the wiring diagrams for a BR cable colour but nothing has come up that runs to a 2 pin plug or that I think would be in that location.
 | Click image to enlarge | '95 VW Corrado VR6
'97 VW Golf VR6
'16 VW Golf R Estate
'23 Porsche Taycan GTS
Just bought '06 Range Rover 4.2 Supercharged
|