So I have the fridge in my FF and it’s ok with 4 cans/bottles but annoying when there are only 2 or 3 so got in touch with Tim from Defender3d and bought this

https://www.defender3d.co.uk/storage/defen...e-dividers

It’s a tight fit but after a bit of a fiddle/slight bending it fits nice and snugly. "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

or use a mcdonalds cardboard drinks holder  ... - .- -.




Y. O. L. O.
.

Yes - that noise when you have less than 4 bottles is super annoying!

Every time you brake etc you get a loud clunk.

I was thinking of making an insert out of zotefoam but the 3D printed one you found looks interesting.

Stan - will also try a McDonald’s drinks holder

stan wrote:

or use a mcdonalds cardboard drinks holder

Cheapskate  "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.