Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > Air filter housing insecure 3.6 TDV8
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Andy



Member Since: 24 Feb 2009
Location: Shropshire
Posts: 2946

United Kingdom 2009 Range Rover SE TDV8 Stornoway Grey
Air filter housing insecure 3.6 TDV8

Last night whilst changing a headlight bulb, I noticed the rubber ring that sits between the air filter box and the left hand inner wing was sitting underneath the air filter box.
I’ve just taken it all out and fitted the rubber ring back into the hole in the wing but it’s not very secure.

I’ve put the air box back in and it’s like it needs something to hold it all steady. I can still move it and it’s only a matter of time before the rubber ring drops off again.

It’s like it needs something to hold it towards the direction of the inner wing to hold it all together.
Anyone else had this and fixed it in any way? 2010 MY Vogue SE TDV8 3.6 Stornoway Grey- fully loaded

Post #718853 30th May 2025 4:53pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site