Hi every one,

Sorry for this question, but I searched on the forum with no success

Few weeks ago, I had an accident on the highway
And it is 100 % my responsability, fortunately, no one was hurt, but the 2 cars have damages.
My FFRR has front bumper and the bonnet damaged.
I think it is a good opportunity to change for an 06 look. The garage who is supposed to repair my car accepts that I give them all the necessary parts to upgrade my 04 FFRR to an 06 facelift.

I found all the necessary parts, but I can't find the post on this forum explaining how to upgrade.
I had a look at L322.com, but this website seems to be off

Does one of you can provide me links to a tutorial please (especially the section concerning the modification to the front wings) ??

wiki,wiki,wiki,wiki,wikiw,wiki......................

http://www.fullfatrr.com/forum/viewtopic.p...8707db8222 ... - .- -.




Y. O. L. O.
.

Thank you scarey, I read the wiki before I asked the question, but in the wiki, there is the list of all the parts required, some info, but no pics, and I'd like to see how to cut wings

you could contact the author of the wiki entry [stevefr] and ask if he has more info of pics ... - .- -.




Y. O. L. O.
.

Hi Raf,
go to http://web.archive.org/web/20100513113712/http://l322.com/ - about 3/4 of the way down there are pics. You just need to cut the front tab off the fenders (wings for Brits - I'm American). Not visible even with the older lights. They used auto body glue in the pics at L322.com (newer cars are not welded or screwed - they are glued ) - I used aluminum angle stock and aluminum rivets.

Wiring is also there. And order the connectors from the link in the wiki.

BTW, the wiring chart is not correct for bi-xenons IIRC. 
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

Thank you Steve
These pics are very helpfull