![]() | Home > Maintenance & Mods (L322) > Where do these belong? |
|
|
|
| WHIZZ73 Member Since: 30 Jan 2011 Location: Hemel Hempstead Posts: 55
|
Ok you Gurus of knowledge!
|
||
|
| 47p2 Member Since: 05 Oct 2010 Location: Gone Beyond, Subaru Posts: 8048
|
|
||
|
| JOKER Member Since: 11 Sep 2008 Location: Sconnie Botland Posts: 15876
|
What are they made of and how big , what like is the other side or is it the same colour |
||
|
| 47p2 Member Since: 05 Oct 2010 Location: Gone Beyond, Subaru Posts: 8048
|
Looks to me like the liner for underneath the sump and gearbox |
||
|
| WHIZZ73 Member Since: 30 Jan 2011 Location: Hemel Hempstead Posts: 55
|
They're made from black plastic and measure 600mm at the longest x 400mm at the widest , they have a small amount of padding as picture but are the same colour both sides
|
||
|
| duckworthparts Site Sponsor Member Since: 30 Jun 2011 Location: Market Rasen, Lincolnshire Posts: 5217
|
any numbers of any sort on them? You can paypal direct using - www.paypal.me/duckworthparts
|
||
|
| 47p2 Member Since: 05 Oct 2010 Location: Gone Beyond, Subaru Posts: 8048
|
Are you sure they're of a FFRR |
||
|
| WHIZZ73 Member Since: 30 Jan 2011 Location: Hemel Hempstead Posts: 55
|
Yes they are from the car for sure!
|
||
|
| duckworthparts Site Sponsor Member Since: 30 Jun 2011 Location: Market Rasen, Lincolnshire Posts: 5217
|
CLF500800 RH inner wheelarch shield
|
||
|
| duckworthparts Site Sponsor Member Since: 30 Jun 2011 Location: Market Rasen, Lincolnshire Posts: 5217
|
|
||||
|
| stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35882
|
super dan to the rescue [again] |
||
|
| WHIZZ73 Member Since: 30 Jan 2011 Location: Hemel Hempstead Posts: 55
|
Thanks a million Dan, looks like I'll have to remove those lovely alloys I had of you again to fit them
|
||
|
| 47p2 Member Since: 05 Oct 2010 Location: Gone Beyond, Subaru Posts: 8048
|
Make sure you have all the clips and pins that hold it on before removing the wheels |
||
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis






