TD6 '02 FFRR Wing Mirror Dismantle and Microswitches |
 |
| TITLE |
+ |
- |
| FILE NAME |
+ |
- |
| DATE |
+ |
- |
|
|
05 Cover removed – 1796 views
|
|
04 Ring Cover removed – 1748 views
|
|
03 Ring Cover released – 1729 viewsOnce you have taken a wing mirror apart you will find the ring cover comes off first. If it has not been dismantled before the main cover is more likely to come off first
|
|
02 Use a suitable flat blade to lever apart – 1742 viewsI use an old stainless steel kitchen knife, strong, slim and blunt ;)
|
|
01 Wing Mirror Passenger Side '02 FFRR – 1486 views
|
|
10 Spiders inside microswitch holder! – 2083 viewsEvidence of arachnid encroachment in the microswitch area :)
|
|
09 Microswitch released from holder – 2214 viewsHere it is - I read on one LR forum a guy saying they didn't exist! This one seems in good nick, just needed a clean up and a quick spray of WD40
|
|
08 Pull Microswitch holder back from mirror housing – 1676 viewsOnce you have the clip down pull the holder back towards you. It will either simply slide back or fight you. The microswitch is on two lugs so should easily come away from the holder, unless it is tightly bound on with spiders web !
|
|
07 Lever the microswitch holder clip down gently – 2040 viewsYou'll see the microswitch holder next to the mirror motor. You have to release the little clip to the outside of the holder just underneath it. I hope you can see my trusty kitchen knife in place levernig it down. The plastic is quite bendy, but be gentle with it.
|
|
06 Release the puddle lamp and remove cover – 2041 views
|
|
14 Ring cover will probably have lots of broken lugs – 1593 viewsThe outer ring has loads of lugs on it, and a lot of these seem to have broken off. This doesn't seem to affect the refixing in anyway.
|
|
13 Driver\'s side microswitch control arm "repaired" – 1380 viewsFixes to folding mirror operation:
1. Double press the fold button or make mirros lock out or
2. Remove fuses 11 & 24. Lock car and wait til it shuts down. Unlock car. replace fuses and turn on iginition. Operate mirror button twice leaving an interval of 15 seconds between each press.
3. Remove fuses 11 & 24, press mirror button, replace one of the fuses, press mirror button, replace other fuse and operate mirro button again
4. With mirror apart, fiddle with shape of microswitch control arm until it work
|
|
| 14 files on 2 page(s) |
|
1 | |
|
