fullfatrr.com Gallery
Home > Member Galleries > Joe90 > TD6 '02 FFRR Wing Mirror Dismantle and Microswitches
TITLE  +   - 
FILE NAME  +   - 
DATE  +   - 
640x-IMAG0431.jpg
01 Wing Mirror Passenger Side '02 FFRR – 1488 views
640x-IMAG0432.jpg
02 Use a suitable flat blade to lever apart – 1743 viewsI use an old stainless steel kitchen knife, strong, slim and blunt ;)
640x-IMAG0433.jpg
03 Ring Cover released – 1729 viewsOnce you have taken a wing mirror apart you will find the ring cover comes off first. If it has not been dismantled before the main cover is more likely to come off first
640x-IMAG0434.jpg
04 Ring Cover removed – 1749 views
640x-IMAG0435.jpg
05 Cover removed – 1798 views
640x-IMAG0436.jpg
06 Release the puddle lamp and remove cover – 2043 views
640x-IMAG0439.jpg
07 Lever the microswitch holder clip down gently – 2042 viewsYou'll see the microswitch holder next to the mirror motor. You have to release the little clip to the outside of the holder just underneath it. I hope you can see my trusty kitchen knife in place levernig it down. The plastic is quite bendy, but be gentle with it.
640x-IMAG0440.jpg
08 Pull Microswitch holder back from mirror housing – 1678 viewsOnce you have the clip down pull the holder back towards you. It will either simply slide back or fight you. The microswitch is on two lugs so should easily come away from the holder, unless it is tightly bound on with spiders web !
640x-IMAG0438.jpg
09 Microswitch released from holder – 2216 viewsHere it is - I read on one LR forum a guy saying they didn't exist! This one seems in good nick, just needed a clean up and a quick spray of WD40
640x-IMAG0437.jpg
10 Spiders inside microswitch holder! – 2085 viewsEvidence of arachnid encroachment in the microswitch area :)
640x-IMAG0443.jpg
11 Driver\'s side microswitch without control arm! – 1412 viewsOn the drivers side I found what I hope is my problem. The control arm had become trapped in the cam for the motor, and parted company with the microswitch. by moving the mirror housing about I was able to release the control arm, then I bent it back into a reasonable shape and refitted it to the micorswitch
640x-IMAG0442.jpg
12 Microswitch control arm trapped in motor cam – 1834 views
14 files on 2 page(s) 1