Home > In Car Electronics (L322) > mystery switch |
|
|
paulmoran2 Member Since: 27 Nov 2013 Location: Leeds Posts: 1422 |
Dont touch it !... if its the one Stan mentioned, its something to do with the pre delivery checks i think?
|
||
29th Mar 2014 2:36pm |
|
paul r Member Since: 27 Feb 2012 Location: Nantwich Posts: 213 |
Too late! Didn't do anything though....why would they need a switch for pre delivery checks?? |
||
29th Mar 2014 2:37pm |
|
axle Member Since: 28 Oct 2007 Location: Perth Perth the end of the Earth Posts: 2964 |
It was disconnected at the PDI ,before that it turned on the electrics or some such so the car could be manoeuvred on to a low loader and the like . 2008 MY Supercharged
|
||
30th Mar 2014 6:32am |
|
SteveMFr Site Sponsor Member Since: 22 Nov 2009 Location: Strasbourg, France Posts: 1641 |
After the PDI it serves as a reset button. All software is reset to base specs in case of issues. Optional equipment may cease to function and will need to be reprogrammed at the dealer. Serves as a general 'limp home' mode for the entire vehicle in case of electronic issues.
|
||
31st Mar 2014 11:01am |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis