Evening folks,
Any idea what the rubber block is that sits under the bonnet / wing & above the vent in pic below?
I've found they've come unstuck on both sides & want to re fix them or replace. (if I knew whet they were)
Any ideas how? Or is it easiest to just replace them?

Rob.

Click image to enlarge

They reduce cabin wind noise sir... Stuck mine back down with a dab of PU glue

Nice one, thanks Craig.  2011 (MY12) 4.4 TDV8 Vogue
2016 Golf GTI PP

Gone
Audi A4
VW Passat
VW Corrado G60
VW Golf GTI
BMW E30
Mini
Vauxhall Chvette

Supposedly fitted to all models or just later ones? If all been long gone on mine  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

There is the same sort of thing on the X-Type, they're a sort of rubberised foam material, as the bonnet gets opened and closed they get tugged by it and tear, eventually falling off. I would expect LR use the same supplier. They did make a noticeable difference when i replaced them on my Jaguar.