Advertise on fullfatrr.com »

Home > Technical (L322) > Rear centre vent repair
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
TimperleyRR



Member Since: 13 Aug 2016
Location: Manchester
Posts: 49

United Kingdom 2006 Range Rover Vogue SE Td6 Buckingham Blue
Rear centre vent repair

Hi All,
I am trying to repair the stuck fan control on the rear vents of my 2006 L322 Vogue SE. The knob circled has only limited movement:



I have freed up the mechanism but there is an arm pictured below:



Which runs in a slot in the arm that swings the shutter of the vent on/off. I include top and side views below. This easily comes out of the slot if any resistance is encountered and I can't work out if there was originally another part that fitted on the end circled (see pics below and above) to retain it in place.



Can anyone advise?

Post #404082 8th Sep 2016 7:35pm
View user's profile Send private message View poster's gallery Reply with quote
UK Marine



Member Since: 22 Jul 2016
Location: Durham, County Durham UK
Posts: 818

England 2003 Range Rover Vogue 4.4 V8 Zambezi Silver

Hi,

Sorry about the short and obvious reply, but have you checked the other side to see what it has in place or are both of them goosed?

Regards ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

Post #404083 8th Sep 2016 7:58pm
View user's profile Send private message View poster's gallery Reply with quote
TimperleyRR



Member Since: 13 Aug 2016
Location: Manchester
Posts: 49

United Kingdom 2006 Range Rover Vogue SE Td6 Buckingham Blue

Actually there is only one unit. It is the one at the rear of the centre console supplying air to the rear passengers.

Post #404084 8th Sep 2016 8:06pm
View user's profile Send private message View poster's gallery Reply with quote
Weegie



Member Since: 09 Jun 2014
Location: East Sussex
Posts: 3195

Scotland 2008 Range Rover Vogue TDV8 Stornoway Grey

You seem to be describing them both as vent controls. The left one is the fan speed control and the right hand one opens both vents. Apologies if I have misunderstood.

PS. Have read your first post again and note you say fan control. As said, my apologies. Embarassed John
2008 Stornoway Grey 3.6 Tdv8 Vogue
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT
2003 Discovery TD5 Auto, Nanocom Evolution - gone to a new home!
MasseyFerguson 152 - No electronics!! - Sold

Post #404085 8th Sep 2016 8:10pm
View user's profile Send private message View poster's gallery Reply with quote
UK Marine



Member Since: 22 Jul 2016
Location: Durham, County Durham UK
Posts: 818

England 2003 Range Rover Vogue 4.4 V8 Zambezi Silver

Errm sorry I didn't spot that either doh.. ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

Post #404097 8th Sep 2016 8:40pm
View user's profile Send private message View poster's gallery Reply with quote
TimperleyRR



Member Since: 13 Aug 2016
Location: Manchester
Posts: 49

United Kingdom 2006 Range Rover Vogue SE Td6 Buckingham Blue

Yes it is the left hand side one I am having trouble with. It is labelled as a fan speed control but in actual fact when you get it out it has 2 mechanisms. It mainly swivels a large baffle at the rear of the unit that impedes the flow off air (this is the lever mechanism I am referring to) then there is a microswitch that activates at the end of the travel. On the other side of the unit there is no visible mechanical attachments to the "hot/cold" button.
I am interested in whether anyone has had these apart before and whether the left hand mechanism looks as mine does or whether there is something missing form the area I have indicated?

Post #404115 8th Sep 2016 10:31pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site