Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > Fixed My Adaptive Dynamics issue, Need Connector help
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Eric Cartman



Member Since: 05 Nov 2014
Location: Dublin
Posts: 108

Ireland 2010 Range Rover Autobiography TDV8 Santorini Black
Fixed My Adaptive Dynamics issue, Need Connector help

Repaired a damaged connection that had been previously repaired on one of my variable damping shocks.

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge


No more intermittent 'adaptive dynamics fault' and the rough handling that comes with it.

Also went to put in these illuminated cills I got
Click image to enlarge


In true land rover / bmw fashion they don't include the power connectors for them in the loom, does anyone have any idea what these connectors are used for (somebody suggested side repeaters connector is the same ) , probably on a bmw/LR of the 2005-2010 era is most likely so I can go get some in a scrap yard, need the plug part that goes in to this) , would also accept somewhere I can get them online.
Click image to enlarge

Click image to enlarge
 Current Vehicles :
L322 2010MY TDV8 Autobiography
BMW E38 735i
BMW E63 645ci

Post #493142 21st Oct 2018 7:00pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 34943

United Kingdom 

i'd change the plug/socket connectors..there are loads of cheap jobbys on ebay ...

Post #493150 21st Oct 2018 7:42pm
View user's profile Send private message View poster's gallery Reply with quote
Baltic Blue



Member Since: 13 Aug 2015
Location: North Wales
Posts: 3687

United Kingdom 2011 Range Rover Vogue SE TDV8 Baltic Blue

How did you connect the new wires to the top of the needle thin pins in the plug?

Click image to enlarge


I tried to do the same, but the wire I bought was too thick.
Did you use very fine wire?
Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Post #493154 21st Oct 2018 8:04pm
View user's profile Send private message View poster's gallery Reply with quote
Eric Cartman



Member Since: 05 Nov 2014
Location: Dublin
Posts: 108

Ireland 2010 Range Rover Autobiography TDV8 Santorini Black

luckily I didn't need to go that far, only repaired a junction some way down, the cap was just off so I could check them, if it failed up there id probably order one of the official repair kits. Current Vehicles :
L322 2010MY TDV8 Autobiography
BMW E38 735i
BMW E63 645ci

Post #493171 21st Oct 2018 9:51pm
View user's profile Send private message View poster's gallery Reply with quote
m@ttsFF



Member Since: 12 Dec 2017
Location: Surrey
Posts: 326

United Kingdom 2016 Range Rover Vogue SE SDV8 Corris Grey

Looks like TE AMP Superseal to me ... get them from RS
You’ll need a crimp tool

https://uk.rs-online.com/web/p/pcb-connector-housings/3141255/ 4.4 AdBlu Tractor
4.2 SC - sold

Post #493204 22nd Oct 2018 8:34am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site