Evening, as some may be aware, my front knuckle snapped last Saturday,so today I have fitted new nuckle and also drive shaft and lower arms. After a drive the car sits high both sides at the front, with a noticeable difference in air gap between front and rear arches.
I have the gap iid tool and can calibrate the EAS , but searching the net I can't find the dimensions relating to the 405 model.
Dose anyone happen to know the distance measurement for front and rear please?
Thanks in advance
PAT SDV8 2015

Hi Fenair,

According to the workshop manual the heights when measured with the vehicle unladen are 471mm at the front and 468mm at the rear.

This is measured from the center of the wheel to the edge of the wheel arch (not the wheel arch liner)

Information gathered from the WSM see screenshot below:

Click image to enlarge

Superstar, many thanks, appreciated.
Have a great weekend
Pat SDV8 2015

Your welcome, hope you get it figured out!

Thank you and same to you. Just hoping for no more snow overnight so I can clean my interior tomorrow!

😂👍 SDV8 2015