AMV wrote:

nicedayforit wrote:

I hate to say it, but if you look in your handbook there is a section devoted to the replacement of all vehicle bulbs.

In fact I read that section and it was very useful
but it doesn't say how can you change the bulb in the round lamp

nicedayforit wrote:

Does in mine but it is older than yours.
Thin blade under the edge of the fitting to pop out the complete light assembly.

Thanks, will try see it on topix website  Santorini Black RR Vogue 4.4 TDV8

daveo wrote:

hi they look fine, if like me you were looking for a led similar to a side light, ie it will not stand out in daylight but will look right at night then that will be fine, if you want some thing that can be seen clearly in daylight then you would need the 5xled 360 degree bulb but at night they look so bright they are like dip beam.
that would be to bright for me...
just changed my number plate lamps
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...K:MEWNX:IT
these worked out just right, i didnt want a bulb that was to bright as it lights up the whole rear bumper and they are meant to be number plate lamps,

my number plate bulbs worked out great, a nice white light.
our xenons are 4300k in the light range so you want to stay around 5000k any higher and you are going to the blue light.. now the prob i found is that most of the leds come or are made in hong kong and what you got the first time round might differ the next time you buy them. you dont need error free bulbs for the interior but you do for the number plate V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

just one thing when talking led's, there are new versions out now that give you far more light, they are projector style and have a magnify lens at the end to focus the light, as you know led's are bright but dont throw light very far,so if you are thinking of replacing your H7 or H11's look for the new lens type, i have ordered the lens type indicators to see how they look.
http://www.ebay.co.uk/itm/H11-CREE-LED-FOG...081wt_1346 V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

indeed , cree smd chips are very bright..i have a flashlight with one of these bulbs in it and its immensely powerful..these do tend to be more focused rather than spread light.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

is there a concensus of opinion on the LED side lights, I'm sick of the difference in main beam and side light

if your talking colour, you need to go for around 5000k, our xenon's are 4300k as standard
here are a few pic of the new cree led's i ave just got.

Click image to enlarge

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

i've been looking at some similar ones on ebay..got a linky for these dave...

edit, just seen your ebay link above...  ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Last edited by stan on 3rd Oct 2011 9:05am. Edited 1 time in total

stupid question.....but is it a straight forward replacement

yes they are phil but you will get an error if you dont use resistors with these.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

cheers scarey, thought so, nest stupid question...where do I get the resistors and how are they fitted?

again ,ebay and they are fitted in parallel , basically to take the current drain.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

thanks again...getting a bit complicated for me now can anyone provide appropriate ebay links to these things?

I am guessing I could turn the error off using Navcoder with these on mine? Reformed