Advertise on fullfatrr.com »

Home > Technical (L322) > Help Sliding pin spanner size? see500020 Front brake removal
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Cooper1275



Member Since: 02 May 2016
Location: Dublin
Posts: 117
Ireland 2006 Range Rover Vogue SE Td6 Buckingham Blue
Help Sliding pin spanner size? see500020 Front brake removal

Hi All,
Hoping someone can help me, I am trying to replace the front brake caliper.

I am trying to find out what size spanner can be used to hold the sliding pins (see500020) while I unbolt the slider pin bolt(SMV500010).

Its proving a bit tricky as my spanner set only goes up to 17mm but is on the chubby side and does not get in under the lip on the slider pin so its had to see what size will be needed.

Really appreciate the help on this one. Bow down


Click image to enlarge

Post #596133 1st Jun 2021 8:10pm
View user's profile Send private message View poster's gallery Reply with quote
Merchy



Member Since: 14 Feb 2021
Location: North Wales
Posts: 1172
United Kingdom 2006 Range Rover Vogue Td6 Zermatt Silver

13mm for the bolt, 16mm for the sliding pin. First make sure you scrape / brush off any rust / scale that may have built up on the flats.
Post #596140 1st Jun 2021 8:59pm
View user's profile Send private message View poster's gallery Reply with quote
Cooper1275



Member Since: 02 May 2016
Location: Dublin
Posts: 117
Ireland 2006 Range Rover Vogue SE Td6 Buckingham Blue

Your a gent! Thumbs Up
Il have to source a skinny 16mm spanner
Post #596145 1st Jun 2021 9:14pm
View user's profile Send private message View poster's gallery Reply with quote
Merchy



Member Since: 14 Feb 2021
Location: North Wales
Posts: 1172
United Kingdom 2006 Range Rover Vogue Td6 Zermatt Silver

If you cannot find a 'skinny' spanner, buy a cheap one and use an angle grinder, file or similar to reduce the thickness. Hope it all goes well Thumbs Up
Post #596155 1st Jun 2021 10:13pm
View user's profile Send private message View poster's gallery Reply with quote
Cam-Tech-Craig



Member Since: 03 Aug 2011
Location: Gloucestershire
Posts: 16257
England 2015 Range Rover SVAutobiography SDV8 Loire Blue

As above, i have a slim set of spanners for this... Thumbs Up
Post #596164 1st Jun 2021 10:55pm
View user's profile Send private message View poster's gallery Reply with quote
Cooper1275



Member Since: 02 May 2016
Location: Dublin
Posts: 117
Ireland 2006 Range Rover Vogue SE Td6 Buckingham Blue

16mm is too small. Big Cry

These are the TRW front calipers.


Click image to enlarge

Post #596220 2nd Jun 2021 4:20pm
View user's profile Send private message View poster's gallery Reply with quote
Cooper1275



Member Since: 02 May 2016
Location: Dublin
Posts: 117
Ireland 2006 Range Rover Vogue SE Td6 Buckingham Blue

A 17 fit it in the end.

Job done, prob spent more time looking for a spanner than I did working Rolling with laughter
Post #596226 2nd Jun 2021 6:58pm
View user's profile Send private message View poster's gallery Reply with quote
Merchy



Member Since: 14 Feb 2021
Location: North Wales
Posts: 1172
United Kingdom 2006 Range Rover Vogue Td6 Zermatt Silver

Ah well, at least you got there, my bits are all Pagid, must be slight differences in sizes, typical RR problems Banging Head
Post #596231 2nd Jun 2021 8:18pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT

Jump to  
<  Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site