Can anyone tell me if this can be configured using the GAP IID tool.
Passenger Window does this from the switch on the Drivers Door but not the Passenger Door.
Just wondered if it was something I cound set up / check ?

Hi Jon, have you tried a reset? Send the window all the way down then hold the switch in the down position for 10 secs. Send the window all the way up and hold the switch in the up position for 10 secs, this should reset it, unless the switch on the passenger door is faulty.

Cheers Dave I’ll give that a try tomorrow 👍

I'm sure it all does the same thing, but this is what worked for me.

https://www.fullfatrr.com/forum/topic61714...ndow+reset


. 2012 L322 4.4 TDV8 AB low mileage - a peach
1986 V8 Defender 90 County ex-Swiss Army - Red everything....

My preferred Independent: Roy Hardy. R & B AUTOS LTD, 20 Brook Road, Wimborne, Dorset, BH21 2BH (Ex LR Chief Technician)

If it works from the drivers side but not the passengers side then its almost certainly going to be the passengers switch at fault...

One touch windows can be learned one side at a time with IID to save all the lifting a button messing about. Christian.


Current Cars
2011 Range Rover Vogue SE
2020 BMW M4 Competition
2019 BMW X4

My RR Blog: www.facebook.com/L322Project
or
https://www.fullfatrr.com/forum/topic61540.html