My wife phoned me today at work to tell me the car has started making a squeeking / grinding noise from the front LHS when she turns the steering

Upon invetsigation when I got home - she was indeed correct - It almost seemed like it was coming from the glove box.

I got her to rock the steering from left to right until I investigated - what i found was that the noise was coming from the strut top mount.

So I took the black cap of the strut top and sprayed WD40 all around the top of the strut and took it for a drive - it has stopped making the noise.

Question is - can anyone tell me what kind of bearing is in there and if it's meant to be a sealed bearing ? I hope WD40 is OK for it - it's certainly stopped making the noise now.....or am I looking at a a bigger problem ?

And while I was poking about I noticed that one of my drop links has a burst rubber boot so that'll be two new drop links from Dan me thinks..... Stolen / Gone: 2006MY Supercharged LPG Autobiography - Zambezi Silver with Sand/Jet/Jet Oxford Leather.....

Last edited by CG-SC on 29th Feb 2012 7:53pm. Edited 1 time in total

Off the topic slightly, but why do u males never believe us "split arses" when there is a problem with the car..

That could also be a term for a man who drives a pink Evoque with a well endowed boyfriend.. Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

keep on topic please.....

Strut top bearing is part of the strut airbag all one unit airbag bearing and mount onto no6 Range Rover

Everyone needs a hobby