![]() | Home > Technical (L322) > 4 Brembo Brakes? |
![]() ![]() |
|
|
SteveMFr Site Sponsor Member Since: 22 Nov 2009 Location: Strasbourg, France Posts: 1641 ![]() |
Hey I'm just a cunning linguist. |
||
![]() |
|
Alias Member Since: 14 Oct 2009 Location: Zurich Posts: 70 ![]() ![]() |
What cunnilinigus? |
||
![]() |
|
dan_uk_1984 Member Since: 12 Nov 2008 Location: Bude, Cornwall Posts: 4014 ![]() ![]() ![]() |
Cootie factory is what it is! ![]() |
||
![]() |
|
Alias Member Since: 14 Oct 2009 Location: Zurich Posts: 70 ![]() ![]() |
Thank u for the information.
|
||
![]() |
|
SteveMFr Site Sponsor Member Since: 22 Nov 2009 Location: Strasbourg, France Posts: 1641 ![]() |
There's one minor issue w/putting front rotors on the rear (aside from offset, diameter, thickness), that is the parking brake drum. Wouldn't have been an issue in the P38, is in the LM. Building a set of brakes is more than just finding parts that would physically fit, too. Brake bias is predominantly determined by the proportion of the front piston volumes vs. the rear. That means you either have to fit the present rear calipers or appropriately match a set - nothing for shade tree tuners... ![]() Aside from all of that, you are looking at considerable expense for... bigger looking brakes that don't actually perform better? ![]() RRC 2Dr, RRC 4Dr, P38, and 2 L322s (wife thinks I'm nuts - prob right, too) |
||
![]() |
|
Alias Member Since: 14 Oct 2009 Location: Zurich Posts: 70 ![]() ![]() |
Yes. ![]() ![]() |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
