fullfatrr.com - View topic - Body Panel Materials

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Technical (L322) > Body Panel Materials

Page 2 of 2

Print this entire topic ·

kingpleb

Member Since: 07 Jun 2011
Location: Maybe here. Maybe there, I get everywhere!
Posts: 8455

There are two bits IIRC, ones for the lip on the body to bumper section and the other is from an RRS that fits the Body-Door section which is often the biggest rust spot... FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

9th Oct 2012 1:25pm

roger 47

Member Since: 24 Aug 2012
Location: Exmoor Somerset
Posts: 77

2012 Range Rover Vogue TDV8 Ipanema Sand

Ok, I've finally fitted the protective rubber strips now the rain has stopped.

This is the top strip which is the LR part for the FF.

Click image to enlarge

This is the front of the wing edge with the door closed, I purchased some rubber door edging from fleabay. I filled the rubber edging with waxoyl and pushed it on.

Click image to enlarge

This is with the door open. I'll wipe the excess off tomorrow.

I also looked behind the wheel arch protector for any rust and found none.

19th Oct 2012 5:35pm

mjdronfield

Member Since: 04 Nov 2011
Location: Derbyshire
Posts: 7635

2011 Range Rover Vogue SE TDV8 Buckingham Blue

Sorted.

That should keep the crap at bay.

Looks pretty much what I got, but without the ridges.

If you are unhappy with the wheel arch near the door at any point, you could get some more of the LR part and cut to length.

Thats what i ended up doing.

Looks good - nice and tidy, and should have been fitted from new - LR Boneheads !! 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

19th Oct 2012 5:51pm

Page 2 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum