Group Buy No Longer Available.

Last edited by nidisco3 on 30th Apr 2013 2:18pm. Edited 1 time in total

That design is for the Disco and Sport models, the FFRR needs an oblong block in place of the round pin shown (at least my Westminster does so assume the others do too). Block size is roughly 3cm by 3cm by 6cm long.

^^^^ beat me to it.
This is the jack adapter needed for an FFRR.
About £10 in aluminium.



Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Opps.. I had thought it would have been the same design through all the models

Oh well..

That looks like what I am looking for nicedayforit except your photo does not show if it has a 30mm wide plug underneath. I mean the plug which fits the hole in the trolley jacks pad base.

Reason I'm asking is I'm in the process of adapting one of the Sport adaptors by removing the round peg and getting an oblong block welded in its place (mine is steel and have just need the oblong block now).

If yours does have the locating plug underneath, where can I get one for about £10? and save me the hastle.

Last edited by oldcro on 30th Apr 2013 5:00pm. Edited 3 times in total

Ebay my friend

And there is a 2 for £18 delivered one i think as just ordered some myself for a member on here  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

 MY 2010 5.0 SC Galway green and sand interior!!
Have the Faultmate MSV2 Extreme to be tinkering with the settings etc. !!

@oldcro

The base of the adapter shown is flat.
My trolley jack has a "cup" as the lift bearing surface. The adapter is designed to simply sit in the cup and provide a bearing surface which locates in the jacking point on the car. Daresay it depends on the type of jack you have.

Thanks for the info nicedayforit, so it's off to the metal shop for me tomorrow.

Any link for the eBay adaptor please ? 2021 P400 Silicon Silver AB
Gone 2011 Bournville TDV8 VSE
Gone 2008 Black Canadian HSE LUX

there are some links found by Will in this thread,


,
http://www.fullfatrr.com/forum/topic14177.html ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.