![]() | Home > Duckworth Parts > Venture Cam Charging |
![]() ![]() |
|
|
Baron Member Since: 20 Apr 2013 Location: Nr Drum Castle, Royal Deeside, Scotland Posts: 305 ![]() ![]() ![]() |
Dan,
|
||
![]() |
|
axle Member Since: 28 Oct 2007 Location: Perth Perth the end of the Earth Posts: 2964 ![]() ![]() ![]() |
Are you saying you don't have a Venture Came dock ?
|
||
![]() |
|
Baron Member Since: 20 Apr 2013 Location: Nr Drum Castle, Royal Deeside, Scotland Posts: 305 ![]() ![]() ![]() |
Don't know what a VC dock is but this may well be the part I'm missing. The cam has 2 contacts on the underside which I assume are for connection of a 12vDC supply (from the car) for charging purposes. So all I need is a VC charging holder (dock?) and from there I just need to wire up a cigarette lighter plug. As the VC uses bluetooth for comms to the head unit in the dash it is just a matter of temporarily syncing it in place of any mobile phone currently synced.
|
||
![]() |
|
Baron Member Since: 20 Apr 2013 Location: Nr Drum Castle, Royal Deeside, Scotland Posts: 305 ![]() ![]() ![]() |
Hmmm....further research reveals the need for a docking station. Not only for providing a charging connection for the cam but also for receiving the VC signal and transmitting it via a canbus connection to the head unit.
|
||
![]() |
|
dave699 Member Since: 03 Apr 2012 Location: Redcar Posts: 457 ![]() ![]() ![]() |
Sorry to add to the problem but as far as I understand it, the dock uses Bluetooth for sending commands / establishing the link. But also uses a seperate frequency to transmit the picture part of the signal back into the AV system.
|
||
![]() |
|
duckworthparts Site Sponsor Member Since: 30 Jun 2011 Location: Market Rasen, Lincolnshire Posts: 5217 ![]() ![]() |
you'd be looking around £180+VAT for the holder You can paypal direct using - www.paypal.me/duckworthparts
|
||
![]() |
|
Baron Member Since: 20 Apr 2013 Location: Nr Drum Castle, Royal Deeside, Scotland Posts: 305 ![]() ![]() ![]() |
Dan, can you give me an idea of the complexity on retrofitting to my RR? Is it a simple job or is it likely to be a show stopper requiring significant trim dismantling? Current: Volvo XC40 T4 R-Design. Loitering with intent to possibly buy back in.
|
||
![]() |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35871 ![]() ![]() |
dont know why you need a venture cam Baron, but would a baby video monitor do the job.. ... - .- -.
|
||
![]() |
|
Baron Member Since: 20 Apr 2013 Location: Nr Drum Castle, Royal Deeside, Scotland Posts: 305 ![]() ![]() ![]() |
Good point, that would probably do just fine. I'd just like one for when I'm reversing up to my trailer hitch. The reversing camera placement is a pants design because its in the wrong place. Should be beside the number plate lights. The neep who decided to put it above the rear window should be shot! Current: Volvo XC40 T4 R-Design. Loitering with intent to possibly buy back in.
|
||
![]() |
|
JOKER Member Since: 11 Sep 2008 Location: Sconnie Botland Posts: 15876 ![]() ![]() |
Sure I mentioned all this regarding docking the venture cam and the Bluetooth signal as well somewhere on this question you asked |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
