Hi
Does anyeone have some drawings or guiding on how to change the wather pump connected to the fbh.
thx -03V td6
-72 Cadillac Coupe DeVille 7,7liter.

it might be worth downloading the RAVE workshop manual ..link in the wiki. ... - .- -.




Y. O. L. O.
.

Hi
Found it all right, but how do i get it detached from the hosing.
And how to air bleed the air/refill the cooling liquid on this system.

thx -03V td6
-72 Cadillac Coupe DeVille 7,7liter.

Have a google for webasto thermotop axilliary heater.

Here are a few exploded diagrams for it out there. Rave doesnt cover it too well as LR will opt to reace the whole unit rather than fix it so only removal from the car is covered.

There are a few pumps out there on ebay etc, from memory when i was looking at mine it is a relatively easy job to remove from the fbh. Few screws and a couple of hoses. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Hi
Thx for this.
I got the pumpe from a local dealer, not wery expensive, and its hold tight by a rubber band like ring thats only attach with one screw.

Anyway the gd hoses i cant get off. Is is a type off quick shift system, or do i have to remove a splint. Il post a youtube guide on this when I get i right

Thx -03V td6
-72 Cadillac Coupe DeVille 7,7liter.

http://nbalacrity.co.uk/wp-content/uploads...Boiler.doc

Does that help. Aparently you need a pair of mole grips (locking pliers) to remove the clip as pliers will slip off..... There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Hi
Nice article, but unfortunatly it does not answer my questions.
Take a look at this pictures for the hose connection.





I could naturally just cut the hoses, but i sup there a way around that.

If you take a look at the last picture, it looks like theres a flat pin that could be pulled out. Theres not much to pull with but my guess is that thats what has to be done. -03V td6
-72 Cadillac Coupe DeVille 7,7liter.

If you mean the U shaped piece of galvanized wire, then I can say with 99% certainty, yes. If you pull it out in the bend it slides out. Be careful not to drop it, they sometimes come out.

Once you removed this locking feature, the hose comes off after some jiggling. The same water hose connectors are used on the engine and transmission water coolers, that is why i know  MY 2010 5.0 SC Galway green and sand interior!!
Have the Faultmate MSV2 Extreme to be tinkering with the settings etc. !!

Yea that is a locking clip.

As ebajema said its a u shaped piece of wire which locks into a groove in the pipe. Should slide out to the left sa per the pic with a screwdriver me thinks. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Thx, that did it. It came off easily, Assembling is just as easy.

Now, how do I refill the system with coolant? or is it a part off the main cooling system? -03V td6
-72 Cadillac Coupe DeVille 7,7liter.

Hi
Looks like the fba sircut and the engine coolant circut is connected, so topping up the engine coolant should do the trick.
If anyone dissagrees i appreciate a comment. -03V td6
-72 Cadillac Coupe DeVille 7,7liter.

Its is part of the main coolant circuit so you need to look how to fill and bleed that. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Hi
Iam about to swap the old Fbh water pump out with a new one due to an error code related to it.
But as I got the inner wheel arch out I came over a switch, the was unused.

Click image to enlarge

Ist a god damn strugle to get the FBH out, at least without removing the wheel as sugested. Got to continue tomorrow, then with the wheel off.
 -03V td6
-72 Cadillac Coupe DeVille 7,7liter.