Have just completed a service on my newly acquired td6.
There is a small diameter hose that comes up from underneath the front oil filter housing and loops around and ends above the heat shield that is at the back below the filter.
It has a barbed end on it.
Just wondering if its connects to anything.

Is it maybe the breather for the gearbox or front diff?

It could be, but I cant see what it connects to underneath the filter.

Time to get your hands dirty then

Been there done that
Still dont know where it comes from

Too many bits in the way to get a look see to where it goes..

Thanks anyway

cheers

I'll let you know next time I have my inlet manifold off (soon!) .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

It leads down to the front diff on the passenger side, 10/10 for John  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Thanks everybody for their input..