Quick one, trim by the kick panels round the heater controls. Is it just one screw and sharp pull forwards?

Slightly out of line and it's pi ing me off.

Steve

Should be, one screw (crosshead or torx sometimes), and when you mean pull forwards, you mean towards the footwell/car door, don't you, not forwards as in towards the engine . The side panels are held on by three popper type fixings, you may break one/or two on the way out... I never know whether a sharp tug or a gentle levering is better, both methods seem to break the little  .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999

Many thanks, thought it was forwards as in towards the seats, as in towards me sitting.

So undo screw and out towards the door?

Cheers

You don't have to unscrew anything

Please see the video below

&list=UUjCbH52t-y0TPd6Y4CElvFw Now: BMW 640d M Sport, Alpine White
Gone: Range Rover 4.4 V8 Vogue, Zambezi Silver, Charcoal Oxford Leather
Also: Mk1 Audi TT 1.8T Quattro, Brilliant Black
[URL=]

Click image to enlarge

Many thanks, i did look on you tube but didn't find this.

Easy job

steve