rent a chipper from Orange plant and put the logs through it a big 6"chipper is £90 for the day and will eat anything tree wise you put in it There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

I can get the chips delivered for free if I ask someone nicely as they often have lorry loads of the stuff in a week 😄😄

Just have to get a lot of matting to go underneath it and stop the weeds coming up as well as some rock salt as well. Think I'll get my butt in gear and get the prep work done this weekend 😄 FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

We had a tree surgeon hear and he had a big diesel shredder that would easily chew up a frozen body so he said apparently he read somewhere, if you freeze them, theres no mess!

But, my gosh would that eat through some wood!

I paid him and included a decent tip

yeah we hire a large diesel chipper a couple of times a year to clear sites. can literally feed an entire small tree into it and you will get a pile of mulch, have to be very careful with them, don't want to get pulled in with the branches. lethal bits of kit.

they have a hydraulic feed roller, and the cutlers are on an large spinning disc behind it. awesome. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

It's something I'd love to get into as a secondary job but I have one problem with it.

I detest heights 😄😄😄

I love working with the wood and breaking it up. When the logs are dried there is nothing better than spending an hour a day for a week breaking wood down by axe! It can be freezing outside and you can be there in a thick t shirt, safety gigs and trousers and boots and the sweat is pouring off you 😄😄 FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Is it good excercise Will?

Sure bloody is! Feel like a weight lifter with some of the fatter logs I move to the chopping blocks

Mind I have two chopping blocks and move two at a time as I can then do 2 or more swings before having to move the rounds again or what's left of them  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Will, i have a huge pile of wood that needs splitting if you want a job pal...

Last edited by Cam-Tech-Craig on 28th Nov 2014 5:22pm. Edited 1 time in total

Ha ha!! Is that in return for a service or other such rangey work 😄😄 FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Its much harder work than doing a service for sure pal...

Huge pile?

Bit of a confession there Craig....

Ha ha!!

I don't know Craig, you haven't serviced a rangey with a full mantec front guard yet have you? 😄

They aren't like the little things fitted to discos and he other LR range 😝 FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

I have one on my TD6 Will so know exactly what you mean pal...... A right pain in the harris

Oh the fun I had fitting that on my back with a pair of drive on Ramos as assistance and some empty 20litre veg tubs!

I guess designing in a hole big enough for oil and diff would have been a bit much to ask 😄 FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.