![]() | Home > Off Topic - Other Cars > Diesel conversion for a Classic, which engine? |
![]() ![]() |
|
|
Philip Member Since: 05 Jan 2010 Location: UK Posts: 2617 ![]() ![]() |
Rattly old diesel is a great way to ruin one (but I think I'd look at the Mercedes engines if I had to). |
||
![]() |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3661 ![]() ![]() |
Craig Mobile Toilets, as they are 10 foot high and 8 foot wide the aerodynamics resemble a parashoot and then they tip the scales around 3 tons, and they eat TD6 gearboxes ![]() A TD5 will pull these loo's, just, BUT it is ECU controlled, and if I'm going to be faffing around doing all the bloody ECU stuff then I might as well dump in a TDV6 and have done with it. I really want to get away from having to plug it in and all the hassle that can come with that......... Lets face it the bloody computers argue with themselves in a car that left the factory.... what chance would I have if I were to try and integrate this in to a car that doesn't have any? For a kickoff the engine ECU talks to the Alarm ECU and the Gearbox ECU and the BCU.... If I ain't got them them I'm going to be in safe mode straight away :evil: Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated ![]() Inventor of the 'Guide-o-Matic automatic wheel alignment tool' Former long term L322 owner, Up/Down graded to a Classic Tractor! |
||||
![]() |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3661 ![]() ![]() |
|
||
![]() |
|
Fretless Member Since: 16 Sep 2015 Location: Renfrewshire Posts: 162 ![]() ![]() ![]() |
It must cost your local council a fortune to install these...
|
||
![]() |
|
Cam-Tech-Craig Member Since: 04 Aug 2011 Location: Gloucestershire Posts: 16341 ![]() ![]() ![]() |
I thought portaloo’s were light as feathers Miggit? Our local “Andyloo’s” runs around with an L200 a 24ft custom built flatbed with about 30 loo’s or so on it! |
||
![]() |
|
kingpleb Member Since: 07 Jun 2011 Location: Maybe here. Maybe there, I get everywhere! Posts: 8455 ![]() ![]() ![]() |
Cummins 6litre jobby.
|
||
![]() |
|
SKOT Member Since: 24 Oct 2012 Location: Milton Keynes Posts: 792 ![]() ![]() ![]() |
OK, I know this won't be popular here but if I was looking for a working vehicle, to tow, not cause me sleepless nights, not depreciate very much and to do inter galactic mileages before needing a spanner anywhere near it then it would be a Landcruiser Amazon for me, all day long....... 2006 4.2 SC
|
||
![]() |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3661 ![]() ![]() |
|
||
![]() |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3661 ![]() ![]() |
Craig, this is the inside of a loo built by a good friend of mine....
|
||
![]() |
|
kingpleb Member Since: 07 Jun 2011 Location: Maybe here. Maybe there, I get everywhere! Posts: 8455 ![]() ![]() ![]() |
Maybe this is better...
|
||
![]() |
|
Cam-Tech-Craig Member Since: 04 Aug 2011 Location: Gloucestershire Posts: 16341 ![]() ![]() ![]() |
Then with such posh loo’s, why not buy a 4.4 TDV8 to tow them with & be done with it... |
||
![]() |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3661 ![]() ![]() |
|
||
![]() |
|
miggit Member Since: 12 Jul 2014 Location: Milton Keynes Posts: 3661 ![]() ![]() |
![]() ![]() ![]() ![]() ![]() Inventor of the 'Guide-o-Matic automatic wheel alignment tool' Former long term L322 owner, Up/Down graded to a Classic Tractor! |
||
![]() |
|
Cam-Tech-Craig Member Since: 04 Aug 2011 Location: Gloucestershire Posts: 16341 ![]() ![]() ![]() |
Not sure where you have heard that from Miggit? I certainly do NOT concur with that statement... The 8sp box has been faultless in my experience, not heard one report of a failure yet...! |
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
