Dan

Please supply costings for the following

07 tdv8 Gearbox sump cover ( with gasket if separate), mechtronic sealing sleeve, gearbox filter and 6 ltrs lifeguard oil to match.

Thanks
Steve

Hi Steve,

You'd be better off with this kit if you want aftermarket lifeguard oil
DA6085G
£180.00inc vat posted.

http://www.britpart.com/all-parts/da6085g/ You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Dan

Do you know if the Britpart sump cover is plastic or metal?
also does it include the mechatronic sleeve?

and
Does the gearbox need setting after a filter change?

Kit comprises of pan assembly, transmission fluid, screws, sleeve & plugs.

i think its plastic... never had one in my hand to check, i'm sure someone on here has fitted on and will be able answer that one for you. You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Does anyone know if I'll need the gearbox reset after unplugging the mechatronic connection? I need to put a new sleeve in when I do the oil and filter

I wouldn't, it'll sort itself out if it needs to, resetting can upset the poor little things.....  Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Parts have arrived £180 incl vat & carriage. ZF 6 x 6 Ltrs Pan, Bolts & sleeve genuine ZF parts.
Q. When refilling (have pump) the fluid goes in cold, then the level has to be checked with the engine running following there procedure and checked - topped up when hot!! Do i take it for a run to warm it up or will it warm up to correct temperature if just left running??

You need to run through the shift stopping at each gear a few seconds, this fill the valves that may have drained down. Then with the engine up to temp do it again and with engine running top up, remember it will be hot down there and burnt hair on the exhaust don't smell too good, don't ask!