Just had my yearly service and MOT, passed the MOT but now waiting for quote for the following..
All 4 anti roll drop links have play
Nearside front lower arm ball joint has play
Offside rear shock absorber noisy

Any of you experts hazard a guess on what i should be paying to fix

Anti roll bar drop links are about £20-£40 for parts and probably about £100 each front and back to fit them maybe less. Did the backs myself earlier this year and they are a pain to get off but can be done DIY if your handy. Fronts can be done without removing the wheels apparently but havent done these myself.

Hope that helps for a start!

Thanks that helps..

Just found these on the bay.

https://www.ebay.co.uk/itm/282193741038

Front only but a start ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

@ UK Marine

Do yourself a favour, if you plan keeping the FFRR for a while then get the parts from Dan, IMO these aftermarket parts are 5hite

Who are o/e for Landrover?

Just trying to help out a fellow owner who just might be on a budget.

FYI I do use Dan for quite a few of my bits and pieces  ______________________________
Simon
______________________________

Range Rover Classic 3.5 efi - Gone
Range Rover Classic 3.9 efi - Gone
Range Rover Classic 4.2 LSE - Sadly gone
Land Rover 110 3.5 - Gone
Range Rover P38a 4.0 SE - Pleased it's gone
Range Rover P38a 2.5 DHSE - Just sold
Range Rover L322 4.4 v8 Petrol - Current

OEM for land rover could be anybody, they didn't use just one company they sourced parts from everywhere, most of the OEM parts are German

I'd have a good look around I found those bits a fiver cheaper at island4x4, and they aren't necessarily the cheapest... for a kick off there's Advanced Factors

Shop around, do a google for parts suppliers, you'll be surprised! FYI just watch out for shipping costs, most offer free shipping if you buy enough from them. Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Thanks who are advanced factors? are they a no go

Site sponsor's on here.