Hi guys,

My passenger side cup holder is missing the spring function so it's not possible to get it out.



As i don't have the bit it's difficult to know what's missing and what i need to order. I guess it's a wound spring on a cog?

Does anyone know where i could get a replacement part?

Many thanks

ia this any help,
http://www.fullfatrr.com/forum/topic32017.html ... - .- -.




Y. O. L. O.
.

Ah yes that does help a bit. So the cog prevents the spring from firing the cup holder out at a million miles an hour, sadly i also have no spring!

So i guess i need both the spring and the cog parts. Any ideas?

Unfortunately you can't buy bits for it, you have to buy the whole thing, around £100 IIRC.... Pete
__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
-Click here for Thread-
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold
2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold
-Click here for Project Fatty off roader-

You could do this for a £3 fix.... And according to Johnboy it has bonuses attached...!!!

johnboyairey wrote:

my spring broke. so I drilled a small hole in the dimple, and fitted a £3 black ball shaped cupboard knob to it, from B+Q
So, now my missus gets to pull out my knob every time I buy her a Costa coffee.

It was £63 from Dan @Duckworths. May have gone up a little. John
2008 Stornoway Grey 3.6 Tdv8 Vogue - SOLD
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT-Sold

I fixed mine with a post on the tray and metal. It just pops out to grab it and pull the rest but I can't spend $100 on a crap piece of plastic.

I did exactly the same as 'Johnboyairey' but alas not the same result.......by the wife that is
Low cost fix to be fair! D3 TDV6 SE 2006
FFRR TD6 Vogue SE Overfinch 2006
RRS TDV6 HSE 2007
FFRR 4.4 TDV8 Overfinch 2012