[Sold] RSW Allcomms - Diagnostic software and cable | |
I have an original RSW Allcoms cable and software license. This is good for a wide variety of diagnostics on L322 2002-2005. It will not be useful for the post-BMW era vehicles. Full details here: http://www.rswsolutions.com/index.php/rang...-all-comms
I've now upgraded to 2010MY, so hoping to pass this on for someone else to get use out of....
At one time, there were quite a lot of fake cables advertised on eBay and the software developer put quite a lot of effort into stopping them from working. This cable was purchased directly from the software developer in the states and is completely genuine. In addition to the cost of the cable, I was also stung for import duties!
I have the software registration code and can supply a copy of the software. Now that I have removed the software from my PC, anyone who has the code will be able to install it. The developer does occasionally update the software, but in recent years there have only ever been quite minor updates. Let's be clear, this is not the same league as the IID Tool, but is very capable of reading and resetting fault codes in a wide variety of modules on these cars as well as re-calibrating the air suspension when replacing an air strut or level sensor.
Total cost to purchase from the developer would be something like £220, including postage. An IID tool alternative would be more - the latest IID Bluetooth is about £400.
How does £80, posted in the UK, sound?
 
Current: 2010 Range Rover L322
Vogue SE, TDV8 3.6, Bournville
-----------------------------------
Now gone: 2002 Range Rover L322
Vogue, TD6, Giverney Green
Last edited by steveball on 21st Nov 2016 11:27pm. Edited 1 time in total
|