On my IID tool it tells me that three of the speakers are open circuit and it refers to them by number, e.g. 2, 3 or 8 etc. Does anyone know how the numbers relate to the speaker positions in the car?
Thanks, Nick Previously a 2008MY Tonga Green Vogue SE 3.6 TDV8

I get something similar on mine. Strange as they all seem to work. 2010 4.4 TDV8 Vogue SE

Nick

There may be info on the speaker locations in the workshop manual in the WIKI for yours. Somewhere around page 2324, if I've got your model right

https://drive.google.com/file/d/0B5al230KXbSyckM0cERBcXZyY00/view

FWIW, I have codes on two speakers and it all appears to work, in fact looking at the GAP website and/or the tool practice section, I seem to recall they have a shot of the same codes I have, go figure that  Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

Thanks rj. I'll take a look. I suppose I just wasn't sure if the diagnostic codes use the same numbering as the workshop manual but it would make sense! If they are the same I can at least check if the relevant speakers are producing any sound!
I'll post what I find out. Previously a 2008MY Tonga Green Vogue SE 3.6 TDV8

 Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT