Just picked up a brand new set of Khan Alloys!
Didn’t think to ask if my original wheel nuts will fit!
So that’s my question and if not, where would I get the proper nuts.

They look very nice.

I would expect 2007 nuts to fit - the thread pattern is the same, but earlier nuts had a slimmer shank / narrower hole in the wheel.

I would remove one nut and hold it in place on the wheel & see if it's a snug fit.

Absolute downer!,
These wheels are for 405! Very slight difference in the stud pattern! Just about fit my car but no room to for wheel nuts  2007 VOGUE SE 3.6 TDV8

Not clear what you mean, David. Are the Khan wheels different from standard LR 405 wheels? Standard LR 405 wheels fit on the 322. John
2008 Stornoway Grey 3.6 Tdv8 Vogue
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT
2003 Discovery TD5 Auto, Nanocom Evolution - gone to a new home!
MasseyFerguson 152 - No electronics!! - Sold

Can’t get them to fit the car! When I spoke to the seller he said that they were for Range Rover 2015!
Maybe he doesn’t know what he was selling! Certainly don’t fit my car, they just about fit the stud pattern, but no space to fit the nuts, my wheel nuts were too big and wouldn’t fit anyway!
So I’ll send them back and retrieve my £1400  2007 VOGUE SE 3.6 TDV8

L405 wheels should fit an l322 chef , might have sent you the wrong fitment maybe?Frustrating when you just want the damn things on!

Hate to add to your pain Chef but they are probably KHAN FAKES from China! Im not aware of any KHAN wheels that take 19mm wheel nuts sir... Happy to be proved wrong...

If they are Craig , then they are fantastic copies!
Glad to be getting rid now!
Would hate if they snapped under load! 2007 VOGUE SE 3.6 TDV8

If in doubt, send KHAN an email asking if they have ever sold wheels for RR's that need 19mm wheel nuts...

Have done so Craig! I’ll report back  2007 VOGUE SE 3.6 TDV8

So the plot thickens, spoke to Chris at Kahn this morning, sent him photos and he has said that they are genuine, although not produced for a few years!
19mm nut with a 60 degree taper is required to fit!
Unfortunately I’ve sent them back now  2007 VOGUE SE 3.6 TDV8

there are better genuine take-off wheels on ebay and a lot cheaper as well...

Fair comment Stan, but I’ve always admired the Range Rover with the Kahn RS-X wheels

I’ll keep looking! 2007 VOGUE SE 3.6 TDV8

Wheels back on the bay! Now advertised as VW, BMW!
Seller obviously didn’t know what he was selling! Got my money and postage returned without question  2007 VOGUE SE 3.6 TDV8

VW stud pattern is the same as LR but I think BMW is possibly different.... anyhow I would personally go with some nice 405 take offs  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6