Home > Technical (L405) > windscreen replacement |
|
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
has anyone had this done and noticed where the heated screen connections are located.
|
||
7th Jan 2020 12:34pm |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3741 |
Stan,
|
||
7th Jan 2020 1:25pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
yes both sides dont work and yes there are 2 relays as in the L322 Mike.....
|
||
7th Jan 2020 2:24pm |
|
Baltic Blue Member Since: 13 Aug 2015 Location: North Wales Posts: 3741 |
best wishes.
|
||
7th Jan 2020 2:26pm |
|
1JBS Member Since: 18 Feb 2014 Location: Henley on Thames Posts: 168 |
Stan
|
||
7th Jan 2020 4:43pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
i dont know if its the screen or the electrics feeding the screen, but thats a good call re trying another dealer..
|
||
7th Jan 2020 4:52pm |
|
Huwrhys Member Since: 07 Feb 2018 Location: Hornchurch Posts: 548 |
In my area, Grange do sometimes and Lookers don't.
|
||
7th Jan 2020 6:07pm |
|
Big Boy R44ROV Member Since: 14 Nov 2011 Location: Ford Hill, Wirral. Not Merseyside Posts: 554 |
I I R C, the feeds are from the A Pillars. Had one done a few years ago and seem to remwmber the connections there. Tony
|
||
7th Jan 2020 6:29pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
i thought 'a' pillars as well...
|
||
7th Jan 2020 6:41pm |
|
1JBS Member Since: 18 Feb 2014 Location: Henley on Thames Posts: 168 |
"@huw, it is an extended but dealer says that doesnt cover if the fault is in the glass ie broken element..."
|
||
7th Jan 2020 7:08pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
thanks for the tip..i'll do that.. ... - .- -.
|
||
7th Jan 2020 7:13pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
thank you for contributing to my thread with two helpful posts John.. ... - .- -.
|
||
7th Jan 2020 8:42pm |
|
charlie croker mk2 Member Since: 21 Jun 2017 Location: Yorkshire Posts: 174 |
The wiring for the 2 sides of the heated front screen is from a junction box in the engine bay .The relay is common to both sides and after that the 12 v feed splits into 2 , each of which is protected by a 40amp fuse . I suppose you could use a test meter in these points ( with the engine running ) . If there is no 12V at the relay then its down to the switch itself or the body control module . If there is 12v at the fuses then its the screen or more likely the connection to it . If you have a diagnostic then you will be able to see the BCM go live ? |
||
7th Jan 2020 9:33pm |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35114 |
very helpful Charlie , thankyou... ... - .- -.
|
||
7th Jan 2020 10:24pm |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis