fullfatrr.com - View topic - 3D Printing - Plastic mods for your RR

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Mods (L322) > 3D Printing - Plastic mods for your RR - ideas?

Page 4 of 5

Print this entire topic ·

MattHughes86

Member Since: 01 Jun 2019
Location: Gloucestershire
Posts: 140

2007 Range Rover Supercharged 4.2 SC V8 Zambezi Silver

YOUR A LEGEND!!!!

sadly i keep getting customers pestering me!!!

just to type this hasa taken 20 mins

Matt If In Doubt Give It A Clout

Previous Vehicles:
Land Rover 110 3.5 V8 (is my dads though)
1.9TD Seat Toledo
1.4 Rover 214 (dont ask)
2.0 Nissan Primera SLX (i want it back)
1.4 Seat Ibiza
996cc Toyota Aygo (I miss this car???)

04 TD5 Discovery 2 (my Current Car)
07 4.2 SC FF (wifes car)

4th Jun 2020 1:02pm

warninglight

Member Since: 11 Mar 2015
Location: SW Cumbria
Posts: 35

I could look into the cooling system bits - there's no reason why a well made part in ABS wouldn't hold up, but it's a high stakes way to find out...

Yes, it's in the 'Open forum' of D2BC, happy to discuss by PMs here etc. too!

4th Jun 2020 1:10pm

horse86

Member Since: 09 Dec 2014
Location: PA
Posts: 860

2014 Range Rover Autobiography 5.0 SC V8 Causeway Grey

horse86 wrote:
Is the parcel shelf lug the same for L405? I’m in need of one of those too

.... 2014 FF Autobiography 5.0 SC
2008 FFRR (sold)
2008 BMW M5

4th Jun 2020 1:21pm

warninglight

Member Since: 11 Mar 2015
Location: SW Cumbria
Posts: 35

No idea I'm afraid - see attached model - a photo or some measurements from an L405 would help

4th Jun 2020 1:27pm

rjff

Member Since: 28 Oct 2017
Location: Cambridgeshire
Posts: 1194

2011 Range Rover Vogue TDV8 Santorini Black

Fair point on the risk, we'd have to accept that. Thinking it could be a viable to have as a standby for owners when working on the intake and top engine area.

PS you have a PM Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT

4th Jun 2020 1:52pm

S.Hafsmo

Member Since: 02 Oct 2018
Location: Nordland
Posts: 170

You could make some speaker enclosures to my corvette. 2007 L322 3.6 TDV8 Stornoway

4th Jun 2020 3:40pm

GGDR

Member Since: 26 Nov 2016
Location: London
Posts: 3519

2011 Range Rover Vogue SE TDV8 Stornoway Grey

How much are these black magic ABS printers then? Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

4th Jun 2020 3:57pm

warninglight

Member Since: 11 Mar 2015
Location: SW Cumbria
Posts: 35

Speaker enclosures are certainly a possibility! Get in touch and I'll see what I can do.

Many of the current crop of printers can print with ABS, the main problem with most is that you need an enclosed printer , as warm air in the print area, and no draughts is key to avoiding warping.

I'm building an enclosure for mine, but the parts are taking an age to arrive. In time I'll likely upgrade to a fully enclosed, more automated printer.

4th Jun 2020 9:19pm

pcourtney

Member Since: 14 Jan 2020
Location: Stansted
Posts: 649

2011 Range Rover Vogue 4.4 V8 Sumatra Black

the rear wiper motor on the L322 is a major problem, new ones are hard to find and expensive, over £200 quid

but many have successfully refurbished the old one, but two new parts are required, the white plastic cog £10 quid

and an o-ring, size 16mm x 9mm x 3.5mm cross section, it needs to fit into the recess and seal against the shaft perfectly

it would be great to 3D print the white wheel cog, but I'm not sure how hard that is gonna be ?????

8th Jun 2020 1:17pm

warninglight

Member Since: 11 Mar 2015
Location: SW Cumbria
Posts: 35

It would be fairly involved to model and get a good print from it, gears are a tricky one.

At £10 off the shelf, I don't think 3d printing could compete there.

11th Jun 2020 7:22pm

p38arover

Member Since: 16 Dec 2015
Location: Western Sydney
Posts: 1516

2004 Range Rover Vogue 4.4 V8 Adriatic Blue

A late reply because I was looking for something else. The upper parcel tray pieces mentioned earlier are available from PowerfulUK

https://www.powerfuluk.com/catalogsearch/result/?q=parcel+shelf Ron B. VK2OTC
2004 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

30th Sep 2022 8:16am

Shaunj69

Member Since: 25 Feb 2022
Location: Bristol
Posts: 49

2012 Range Rover Autobiography 4.4 V8 Zambezi Silver

What about the sun visor clips?

3rd Oct 2022 4:00pm

wayneg

Member Since: 05 Jun 2013
Location: South Fremantle, Australia ( ex London )
Posts: 775

2007 Range Rover Vogue SE TDV8 Java Black

you can get the clips from China for around 15 pounds, I got one and its perfect. https://www.aliexpress.com/item/1005004288...YgRYXahm1b 2007 TDV8 VSE
2003 TD6 gone.
2002 P38a gone
1999 P38a gone
1997 p38a gone
1993 VSE gone
1992 VSE gone
1966 Series 2a with V8 conversion gone

4th Oct 2022 1:22am

dhallworth

Member Since: 10 Oct 2011
Location: Glasgow
Posts: 2984

2012 Range Rover Autobiography TDV8 Baltic Blue

p38arover wrote:
A late reply because I was looking for something else. The upper parcel tray pieces mentioned earlier are available from PowerfulUK

https://www.powerfuluk.com/catalogsearch/result/?q=parcel+shelf

They're available from LR too and they're not that expensive so probably not worth the hassle of 3D printing.

Short one - EPN000010PUY - £7.54
Long One - EPN000020PUY - £7.63

Duckworths supplied me with mine not that long ago.

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior

4th Oct 2022 12:14pm

colalowe

Member Since: 11 Jul 2021
Location: Lancashire
Posts: 104

2012 Range Rover Autobiography TDV8 Buckingham Blue

Just spotted this height calibration tool.

https://www.thingiverse.com/thing:4876692 2012 TDV8 Autobiography Baltic Blue
Previous
2007 BMW M5 E60

4th Oct 2022 2:18pm

Page 4 of 5

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum