Home > Technical (L405) > center console cubby armrest removal. |
|
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 34871 |
anything in the WM? ... - .- -.
|
||
24th Jun 2020 5:02pm |
|
funnyguy1 Member Since: 11 Mar 2010 Location: Sun Valley, Idaho Posts: 378 |
The Land Rover Mechanic told me the rod punches out left to right and I have tried with a punch and hammer but it didn't come out and i was afraid to force it. Is there a shop manual that explains how to remove it? |
||
24th Jun 2020 5:15pm |
|
AnotherMutley Member Since: 16 Jan 2017 Location: Kent Posts: 399 |
Looking at the WM, it looks like the lid has to be raised when you drift the pin out. |
||
24th Jun 2020 5:44pm |
|
notanrdx Member Since: 23 Jun 2020 Location: Austin Texas Posts: 37 |
Here is all the WM has to offer
|
||
24th Jun 2020 6:19pm |
|
funnyguy1 Member Since: 11 Mar 2010 Location: Sun Valley, Idaho Posts: 378 |
Yes, thats all I have as well. I will try with lid open though. Most RR stuff is not that complicated but this has me stumped. |
||
24th Jun 2020 7:33pm |
|
notanrdx Member Since: 23 Jun 2020 Location: Austin Texas Posts: 37 |
maybe just a dap of WD-40 where the pin goes through the sides? |
||
24th Jun 2020 7:36pm |
|
funnyguy1 Member Since: 11 Mar 2010 Location: Sun Valley, Idaho Posts: 378 |
Will try that as well. Thanks!! |
||
24th Jun 2020 7:37pm |
|
funnyguy1 Member Since: 11 Mar 2010 Location: Sun Valley, Idaho Posts: 378 |
That was it!! Thank you so much! Top has to be up!!! |
||
24th Jun 2020 9:50pm |
|
AnotherMutley Member Since: 16 Jan 2017 Location: Kent Posts: 399 |
Cool, glad it was something simple. |
||
25th Jun 2020 9:16am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis