hi, trying to remove one of my back lights to see why it keeps getting condensation,removed the 2 bolts and it should come out but i will not... the top pops out but seems to be held in at the bottom, didnt want to pull to hard as its easier to ask how then to pay out for a mistake V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

it should just pop off maybe give it a good tug
I know how wrong that sounds  "RANGEISM WILL NOT BE TOLERATED"
www.futuresecurityservices.co.uk
Pretlove says , '' I want my car back "

Wrap a screwdriver in loads of masking tape, then place a cloth against the bodywork and pop it out using the notches in the light unit, always works for me.

Let us know how you get on with the condensation, mine are always misting up and it annoys me. 2006 Mercedes CLS
1991 Retro-style Mini
But really finding it hard to fight the urge for a S/C...

i have a trim tool set,made from nylon.. i will use them now i know for sure that there are no hidden fixings, i do know the notches you are talking about...
my ones started misting up after it had been in the spray shop in the oven..never had a prob before that

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

they can be a to get off dave , and you might ding the paintwork..here's the powerfuluk video..

&playnext=1&list=PL063C3AB14BE6984C ... - .- -.




Y. O. L. O.
.