Hi all
Need a bit of help here please. Today successfully enabled Drls and got as far as changing the speedo to Kph with the mph set in the digital readout in the centre. Problem I now have is that I can't change back the main speedo to show mph as before.
Anyone had this happen to them and if so can you let me know what I am doing wrong as I am missing something - hopefully!
I've been going round in circles.
regards
Dave

Dave,

From memory -- you go into the car menu and change it back after you've used IID -- should then leave you with both in MPH -- though I am getting old and memory is failing ! Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

I must admit, I'm confused as to why UK based drivers would want the main dial in kph and the digital one in mph.

I've gone for the other way round which will do me just fine if I ever take it abroad and need to use kph.




(Yes, I've sorted the date out since I took the photo!)

Dunc. The life you have is the only one you'll get; make the most of it.
--------‐--‐-----------------‐------------------‐---------------------------------------------------
2012 4.4 TDV8 L322 Autobiography
2003 TD5 Oslo Blue D2 ES Premium Auto (with mods!)

when i travel abroad i have the main dial as KPH and the digital as MPH so i can get an idea of the KPH speed [if that makes sense] ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Well folks that is where I’m stuck, so can Stan explain to me how he gets it back to mph on the main Speedo layout please. I can set it up if I get abroad after these lock downs. Not sure where to find any settings other than the trip settings and I have that as mph, mpg etc from the steering wheel?
Thanks Dave

i havnt a 2012 anymore so i cant remember where in the menu the setting is but its defo there..


unless you have done something in the CCF that wont allow this.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

this is from a thread on the forum,


 ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Thanks for the update Stan. I may have not used the OK button after selecting mph etc buttons etc. and that could be it. Could be something that simple and I will try that out tomorrow.
Many thanks Stan
Dave

Got it sorted this morning and back to mph etc. I was missing the important link - the line on Ccf “ Main Scale “ and therefore not changing back to mph!!! This had been mentioned on the previous posting but the old grey cells needed a bit more time.
Thanks Stan and everyone for saving a embarrassing trip to a garage.
Regards
Dave

 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
New Defender D300 90 on order so "Rory" will be going to a new home....!
1974 Series 3 Lightweight = "Millie"
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------

On our FL2 the radio mute when the PDC picks up something.I find it very handy and would like to know if this is possible on my 2012 FFRR?I have a Iid tool. 2012 TDV8 Vogue SE 4.4

not seen that adjustment in the menus... ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

PatGAPInnov wrote:

Certainly, once you have a tool on hand, send me a PM and I'll arrange it

if its a digital speedo then the mph to kph can be selected in the menu.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

by some reason, I have only 2 option mph/kph and it switch everything and digital(with numbers) but main speedometer still in kph(round one). Maybe that car is from Ukraine and they give this 3 options only for UK car, not sure