Can anyone help me, I’m looking to replace the wiper blades for the lights on a 2003 L322, are these identical to the P38 ones? As I’m struggling to find any replacement blades! L322 TD6 2003
Epsom Green- the dogs car which has worked it’s way into being the family car 😮

Hey SP, I’m in Australia, i found some wiper blades at a car accessory retail outlet….they were full length and i cut them down to size, works a treat
You just need to remember to give one end a slight crimp before you fit them.

Thanks for the help. Just found some new old stock ones so went that direction, but given low stock I’ll have no option but to do that next time L322 TD6 2003
Epsom Green- the dogs car which has worked it’s way into being the family car 😮

I suppose you’re lucky that you found old stock, at least its fixed !

For info, headlight washers are only required for mot purposes on vehicles with xenon headlights from September 1 2009 onwards, vehicles manufactured before that date do not need headlight washers whatever the bulbs used. If you have trouble, nothing to stop you removing the headlight washer assemblies completely and fitting blanking plugs to the two holes left.

Island used to have them. I replaced mine long time ago but after few months pulled the fuse. They make more arm to the headlight glasses than good. Worst is in winter when the water freezes. So they just keep on rubbing the salt, dirt etc. It will not happen with windscreen wipers but does with headlight ones.

Googs wrote:

Hey SP, I’m in Australia, i found some wiper blades at a car accessory retail outlet….they were full length and i cut them down to size, works a treat
You just need to remember to give one end a slight crimp before you fit them.

I have changed them many times using a cheap replacement rubber from e-bay. Just cut to length
https://www.ebay.com.au/itm/385743623447?h...R8rUi_T6Yg 2007 TDV8 VSE
2003 TD6 gone.
2002 P38a gone
1999 P38a gone
1997 p38a gone
1993 VSE gone
1992 VSE gone
1966 Series 2a with V8 conversion gone

Thanks Wayne. I thought the blade would need the metal backing strip. Ron B. VK2OTC
2004 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

use the old 2007 TDV8 VSE
2003 TD6 gone.
2002 P38a gone
1999 P38a gone
1997 p38a gone
1993 VSE gone
1992 VSE gone
1966 Series 2a with V8 conversion gone

I thought of that but the rubber you linked doesn't have a slot for the strip. Ron B. VK2OTC
2004 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

Hey Ron, have a look at these mate
i used these and found them to be good value.
freight is super quick even with Aus Post link below

https://www.wipertech.com.au/wiper-blades/...-1994-2002 2003 RR L322 4.4 ltr Auto Zambezi silver Custom paint

Googs wrote:

Hey SP, I’m in Australia, i found some wiper blades at a car accessory retail outlet….they were full length and i cut them down to size, works a treat
You just need to remember to give one end a slight crimp before you fit them.

Googs wrote:

Hey Ron, have a look at these mate
i used these and found them to be good value.
freight is super quick even with Aus Post link below

https://www.wipertech.com.au/wiper-blades/...-1994-2002