help would be appreciated, ive got 2013 L405 sdv8, when pairing your FBH remote should ignition be on or off when fuse removed,

Off. At least that's how I did mine.

Pull fuse for 30s or so, put it back in and press the 'off' button on the fob immediately.

thanks E500 i will leave the fuse out longer, and try again, any idea of exact location of reciever on L405 as can not find it?

E500 wrote:

Off. At least that's how I did mine.

Pull fuse for 30s or so, put it back in and press the 'off' button on the fob immediately.

This thread helped me. https://www.fullfatrr.com/forum/topic46437.html

On my car (MY16) the fuse was in the passenger footwell fuse box. I think it's fuse 1, but you should be able to check in your manual.

The receiver itself is in the OSR wing I believe.

This thread, about retrofitting the whole system, contains some good info about where the receiver is: https://www.fullfatrr.com/forum/topic57037.html

As soon as I get chance i will pull fuse wait longer than I did last time which was about 10ish seconds and see what hhappens, appreciate the input thanks