Can anyone tell me how to switch the “take a break” warning off please?

Doing a lot of driving this week and it’s annoying me! "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

83 views but no comments - anyone? "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

Here you go, but be aware the system is monitoring your driving and can notice changes in your style as you get more fatigued.

https://www.ownerinfo.landrover.com/docume...4/G2220184 2018 SE SDV8 4.4 Byron Blue

That's for the L405 I think, slightly different in the L460:

https://www.ownerinfo.landrover.com/docume...0/G4223239

But Kot makes a good point, it spots fatigue rather than being on a time limit.

Thanks 00by

It has been driving me mad and I couldn't figure it out, but perhaps if i have a paper copy of the manual I would have read it and worked it out.

00by wrote:

That's for the L405 I think, slightly different in the L460:

https://www.ownerinfo.landrover.com/docume...0/G4223239

But Kot makes a good point, it spots fatigue rather than being on a time limit.

Profile is for a 2019 l405 as there ain’t anything newer on the profile list that I can find

Car is a 2025 D350 AB which is why I posted under the l460 section  "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

The driver condition monitor feature can be switched on or off via the touchscreen. To switch the feature on or off, complete the following steps:
Touch the settings icon from any screen. See .
Select Vehicle.
Select Driver Assistance.
Select Collision Avoidance.
Driver Condition Monitor: Touch to switch the toggle on or off.

I ordered the paper manual and it has a pretty vital piece of additional information; the monitor comes back on each time you restart the car. 2025 P550e AB