hi all , I am assuming that many on here with the new L460 have had problems with the JLR in control (remote) app ....gives status of vehicle , journeys etc !

So my app says at the very top once opened VEHICLE ASLEEP and as far as i can see wont connect to the vehicle ? or at least dosnt update ?

any one had similar issues and if so was the fix to take to the stealer ! many thanks

If you have not driven the vehicle for a few days it does that - try going and opening/starting the car and see if it’s still the same just after you lock it and leave if for an hour  "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

thanks for that .... doesn't seem to be the issue though . I drive the car daily (sometimes much further than other times.

A bit surprised others on here not had the same issue I thought it was common ??

thanks for that .... doesn't seem to be the issue though . I drive the car daily (sometimes much further than other times.

A bit surprised others on here not had the same issue I thought it was common ??