Used the IIDTool to get the adaption values from the vehicle. Getting odd values. Anyone seen this before or has any advice on how to sort.

Camshaft Adaption Exhaust Bank 1 - 45.66 degrees
Camshaft Adaption Intake Bank 1 - 442.60 degrees, yes not a typo

442.60 degrees.

Also throwing the P0017 error - Camshaft position and crankshaft position synchronisation error.

Changed the Solenoids, both camshaft sensors - intake and exhaust and crankshaft sensor, no luck.

Car runs fine with the occasional EML coming on (Error code P0017) and then going off after driving for a while with no need for a scanner reset. Have done over 6,000 miles with this issue.

I am lost. Its the 2018 P400e 2.0l Petrol PHEV.

see picture.

Click image to enlarge