Good work

Any chance of posting the links to the parts?

Cheers

What do I need to search for, had a quick look but can't find them ....

Hi chaps not sure how to post e bay links but if you search Camera suction mount that seems to bring up the mount then digital action mount or sports camera mount brings up the camera holder. I just use the two back to back using the velcro straps that should hold the mount to a bike etc to hold the venture cam then just screw the two mounts together both going half way into the lock nut if that makes sence. I have since made up a little 1/4 whitworth adaptor to hold them together but the half and half way works fine.  Mine was a blue one!

'sense' sorry tipo Mine was a blue one!

Do you mean, something like This bolted back to back with Something like this.

Thats the babys  Mine was a blue one!

Already got (a), how do I fix (b) to (a) as they both have male fittings??

Hi both mounts come with a locknut to adjust how far you screw the camera on, you just (being rough) screw the male fittings into one of the locknuts from both sides until they lock together. As you dont need to undo it again you could use a bit of studlock or superglue to make sure it wount come undone but if you gentle grip the male thread on the suction mount with pliers while screwing the other one in it locks together quite well. You could reduce the length of one or both of the male threads but it can limit the amount of articulation available. Or make up a little 1/4 whitworth adaptor  Mine was a blue one!

Cool, sounds good, thanks!

Is it possible to record from a Venturecam, either onto a laptop or on the FFRR? I ordered one for my Westminster and wondered how it could be done.

Hi Oldcro
Sorry I dont know, the connection seems to be bluetooth so if a laptop has bluetooth it might find it.
As yours is newer the resolution might be better than the early ones which is a bit poor IMHO
No doubt some of the techi boys on here will know Mine was a blue one!

Somebody suggested this link:


the genuine mount - minus cam holder

www.fastfilms.co.uk

Panavise PV809 suction mount

I thought the OEM to landrover was G-Force mounts they even say so on their web site but as you corectly say you can buy the mount but not the pocket/holder for the Venturecam
Its about £26 thats why I went with the copy off the bay
 Mine was a blue one!