|  | Home > Maintenance & Mods (L322) > Cleaning interior pillar plastics. | 
|     | 
 | 
| 
 | 
| jfb1977 Member Since: 29 Apr 2012 Location: Bury St Edmunds Posts: 563      | 
 I've had marks all over the inside of my pillars (they're cream plastic in my car) since I bought the car.
 | ||||||
|  9th Jun 2012 3:58pm | 
 | 
| mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 8001      | Well that looks excellent.
 | ||
|  9th Jun 2012 4:43pm | 
 | 
| jfb1977 Member Since: 29 Apr 2012 Location: Bury St Edmunds Posts: 563      | Just to be clear, I used an abrasive rubbing compound rather than a polish.  My interior plastic actually IS slightly textured - at least it's not "shiny flat" if you know what I mean?  I just used a kitchen wipe to remove any residue afterwards. 
 | ||
|  9th Jun 2012 5:06pm | 
 | 
| mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 8001      | I know polish isn't the same, just wondered whether it was "near enough"........
 | ||
|  9th Jun 2012 5:14pm | 
 | 
| Joe90 Member Since: 29 Apr 2010 Location: Hampshire Posts: 6434    | My plastic has some scratches that seems to show there is some kind of top coat / finish on this plastic so rubbing down does the job nicely .
 | ||
|  9th Jun 2012 6:44pm | 
 | 
| axle Member Since: 28 Oct 2007 Location: Perth Perth the end of the Earth Posts: 2964      | For any cleaning like this I have always found a Magic Sponge ( melamine foam ) works best , it will clean any marks off just about any surface without the use of a cleaning agent or solvent so you don't have to worry about destroying surfaces or leaving any marks / residue . 2008 MY Supercharged
 | ||
|  10th Jun 2012 6:39am | 
 | 
| daveo Member Since: 21 Oct 2009 Location: london Posts: 2307      | heres a pic of the tail gate trim, i went a bit to hard with the scrubbing brush,   | ||||||
|  10th Jun 2012 11:35am | 
 | 
| mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 8001      | .....also food for thought.........
 | ||
|  10th Jun 2012 11:50am | 
 | 
|     | 
 | 
| All times are GMT | < Previous Topic | Next Topic > | 
| Posting Rules 
 | 
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
 
 
 
 


 
 



 

 now found out it was coated.
  now found out it was coated.


