Go back through the fuses, one by one and make sure nothing popped when re-inserting them the first time. I managed this on mine when I had the OBD socket apart to straighten one of the connectors.

I don't recall which fuse it was not but I do remember it was something fairly innocuous looking which immobilised the whole car. I ended up taking the battery off and then pulling the fuses one by one and checking them with a meter (old eyes) rather than just a visual check. Once I found the offending item it was all good again.

Best of luck.

I did do that last night but I am going to have to do it again later why are landrovers such a piece of
might go with meter idea though becauese did a visual check.

Anybody know how to re code a key
however both dont work you can insert and turn the key but there is no click like there usiually is when you put it in the ignition it just wierd everthing works exept instruments and ignition??? Mine was a blue one!

invest in a brand new battery and refer to the battery procedure in the wiki....this cold weather mess's with all the ecu's on the range and you need a fully charged battery .. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

I don't think so Stan. I know what you say about needing a well charged battery is true but this really sounds like power isn't getting to one circuit. Other stuff works fine, just not the dash.

I remain convinced it's a dodgy fuse or similar on the basis I had a similar thing.

Dom.

betcha a mince pie its the battery...  ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Sorry Stan you owe the man a pie!
In the dark last night (In my defence after a day from hell) I had put a fuse back in the wrong slot so even when I double cecked I was still looking in the wrong place.
Just gone through them all with a clearer head and found it. Just got to sort blower fan now so got to wrestle with FSR.
Thank for all the help sorry I was a numpty (Supposed to be an electrical engineer lol)

Ps people say you can see or spin the fan by taking pollen filter out but I cant see it or do they have little hands cause mine will not fit!

Thanks again  Mine was a blue one!

at least its sorted now Andy..... ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Ahem Stan, I'll PM you the address. If you'd be good enough to have Waitrose deliver the mince pie please chap

Expensive time ahead Stan

eh, who asked ye then John, ya neep-heid

I don't look anything like that anorexic weejie.